Announcement
Collapse
No announcement yet.
Hub Model 2242-222
Collapse
X
-
Hi Guys, The Hub Model 2242-222 is a remarkable device that excels in performance and functionality. Its sleek design, advanced features, and seamless user experience make it a top choice for modern technology enthusiasts. An exceptional innovation that surpasses expectations.Last edited by INSTEON John; 05-29-2023, 09:04 AM. Reason: Erased hidden code linked to a non-relevant web site like spam
-
Originally posted by freddie0852 View PostHello
To reset the password on your Insteon Hub Model: 2241-222, you will need to perform a factory reset. Please note that performing a factory reset will erase all of the settings on the device, including any customized configurations you may have set up.
To perform a factory reset, follow these steps:
Disconnect the Insteon Hub from power.
Press and hold the reset button on the bottom of the hub.
While continuing to hold the reset button, plug the hub back in.
Continue holding the reset button for 10 seconds until the status LED on the front of the hub begins to flash.
Release the reset button.
Wait for the status LED to stop flashing, which should take about 1-2 minutes.
Once the status LED has stopped flashing, the Insteon Hub has been reset to its factory default settings, including the password.Last edited by INSTEON John; 05-07-2023, 10:28 AM. Reason: Displaying links to external sites that have nothing to so with the topic - SPAM
Leave a comment:
-
To reset the password on your Insteon Hub Model 2241-222, you will need to perform a factory reset. Here are the steps to do so:- Locate the reset button on the back of the Insteon Hub. It is a small pinhole button.
- Use a paperclip or similar object to press and hold the reset button for approximately 10 seconds.
- Release the button when the LED on the front of the Insteon Hub begins to flash.
- Wait for the Insteon Hub to complete the reset process. This can take up to 5 minutes.
- Once the reset process is complete, you can log in to the Insteon Hub using the default password, which is "admin".
Keep in mind that performing a factory reset will erase all of your existing settings and configurations, so you will need to set up your Insteon Hub from scratch. You can follow the instructions in the user manual to complete the setup process.
Last edited by INSTEON John; 04-03-2023, 03:27 PM.
Leave a comment:
-
When the user's device is set as a primary device and the organization has their location tracking setting set to always.
Leave a comment:
-
This is perhaps a similar issue. I have changed my internet provider. The ip addresses on the old provider are 192.168.12.XX and teh new povider are 192.168.12.XX. How do I move the 2245 hub to the new provider? (at the moment I have both providers). Thanks for your help
Leave a comment:
-
Hello
To reset the password on your Insteon Hub Model: 2241-222, you will need to perform a factory reset. Please note that performing a factory reset will erase all of the settings on the device, including any customized configurations you may have set up.
To perform a factory reset, follow these steps:
Disconnect the Insteon Hub from power.
Press and hold the reset button on the bottom of the hub.
While continuing to hold the reset button, plug the hub back in.
Continue holding the reset button for 10 seconds until the status LED on the front of the hub begins to flash.
Release the reset button.
Wait for the status LED to stop flashing, which should take about 1-2 minutes.
Once the status LED has stopped flashing, the Insteon Hub has been reset to its factory default settings, including the password.Last edited by INSTEON John; 05-07-2023, 10:37 AM. Reason: Erased hidden code linked to a non-relicent web site like spam
Leave a comment:
-
I am assuming this is a 2242-222 Hub. I'm not familiar with a 2241-222 model. I do not see enough info here to advise whether or not it needs to be reset.
There is a password reset option at the login screen of the 'Insteon for Hub' app, or you can go to: http://connect.insteon.com and click on the forgot password link there.
If you do not remember the email address used on that unit you can take a picture of the bottom of the Hub, so you can see the ID, and send that to: support@insteon.com requesting the email address used on the unit so you can update the password.
If this is not a 2242 or 2245 model please update the group.
Leave a comment:
-
Hub Model 2242-222
Please, I bought a long time ago an Insteon Hub Model: 2241-222
I no longer have the password for it, and do I need it to reinstall? how do I reset the password to have another password?
Thank you.
Tags: None
Leave a comment: