It would be nice if, in the 8 button mode, I could program any of the 8 buttons to be the active button for the attached load (vs always the top left button). This would allow me to setup multiple keypad devices with the exact same configuration (i.e., the top left button is always Kitchen, position D is always Family Room, etc.), which makes for a better user experience. I suspect it might be possible to accomplish this solely via firmware changes. [And yes, I realize I could program button D to -also- control the load, but I want to free up button A to use for a different purpose.]
My second wish list item would require some hardware changes. I have instances where a single wide outlet box contains a double switch controlling two devices. On the keypad dimmer, how about adding a 2nd red wire and controlling two devices via the single keypad device? And as above, allow the choice of buttons to be programmed by the owner. I could live with a 600w aggregate load.
Lastly, a suggestion for the 25-button (and 50-button) etched button kit. I'd rather have a single small 'ALL' button than separate "ALL ON" and "ALL OFF" buttons. If the button is lit, pressing it turns everything off, and vice versa. This frees up a button for something else (like 'BEDROOM' for the 25-button kit).
My second wish list item would require some hardware changes. I have instances where a single wide outlet box contains a double switch controlling two devices. On the keypad dimmer, how about adding a 2nd red wire and controlling two devices via the single keypad device? And as above, allow the choice of buttons to be programmed by the owner. I could live with a 600w aggregate load.
Lastly, a suggestion for the 25-button (and 50-button) etched button kit. I'd rather have a single small 'ALL' button than separate "ALL ON" and "ALL OFF" buttons. If the button is lit, pressing it turns everything off, and vice versa. This frees up a button for something else (like 'BEDROOM' for the 25-button kit).
Comment