I have several questions l. I have a large Insteon installation that has been running for 11+ years. By large I mean somewhere around 100insteon devices. I put them in as I built the house so they are everywhere. Stating last year I started to have some device issues.
I have 6 devices that are misbehaving. This is the first time in 11 years I have had any issues so all and all a solid system.
I am having several devices set to 9minute ramp rates and 0% on levels. I was able to factory reset some devices then reload the link table and they work ok. 3 of the 6 work after this process.
1 works but the keypad linc powers of any time a button is pressed or a signal is sent to it. It is really weird. It is a 6 button the on off buttons work fine but is you press any of other 4 buttons the lights go off on the keypad for about 3 seconds and it misses all signals sent to it.
1 8 button keypad just flashes on and off not stop. The connected load does the same.
1 switch linc dimmer the load does not turn off. Once the device powers the load comes on. Toggle the switch and the leds go up and down but the load does nothing. I think I read somewhere this is a bad triac ? Not sure if that is a end user replaceable with moderately electronic experience.
Any help as to what would cause the random
reprogramming and also the other device issues would be much appreciated.
I have 6 devices that are misbehaving. This is the first time in 11 years I have had any issues so all and all a solid system.
I am having several devices set to 9minute ramp rates and 0% on levels. I was able to factory reset some devices then reload the link table and they work ok. 3 of the 6 work after this process.
1 works but the keypad linc powers of any time a button is pressed or a signal is sent to it. It is really weird. It is a 6 button the on off buttons work fine but is you press any of other 4 buttons the lights go off on the keypad for about 3 seconds and it misses all signals sent to it.
1 8 button keypad just flashes on and off not stop. The connected load does the same.
1 switch linc dimmer the load does not turn off. Once the device powers the load comes on. Toggle the switch and the leds go up and down but the load does nothing. I think I read somewhere this is a bad triac ? Not sure if that is a end user replaceable with moderately electronic experience.
Any help as to what would cause the random
reprogramming and also the other device issues would be much appreciated.
Comment