I'm having my sump pump replaced and I'm adding 2 I/O modules nearby for monitoring. I'm adding a new work box as I need to have access to the hot feeding the outlet to the pump so I can add a current sensing relay in the box. I'd either plug the pump into the IO module's pass through outlet, or an outlet that is a few wire inches away from both IO modules
Question: any experience with motors or noisy devices near the io module where the module is damaged? The cautions in the manual talk about no stacking Insteon modules or plugging hot things like power supplies in; neither of these things will be true in my case.
I don't think interference will be a problem as I'm not controlling the load, only monitoring it. I'll deal with interference if it proves to be problematic.
Question: any experience with motors or noisy devices near the io module where the module is damaged? The cautions in the manual talk about no stacking Insteon modules or plugging hot things like power supplies in; neither of these things will be true in my case.
I don't think interference will be a problem as I'm not controlling the load, only monitoring it. I'll deal with interference if it proves to be problematic.
Comment