I'm having a bit of trouble getting the status lights to synchronize on a pair of 6 button keypads which are controlling fanlincs.
This is how I set them up:
Good so far, however...
The current issue is that the remote keypad's scenes status do not act as a radio group, only the local scene buttons properly act as a radio group. In otherwords, if I pressed Keypad (B)'s Scene C then Keypad (B)'s Scene D, the local status light will toggle from Scene C to Scene D on Keypad (B) but on Keypad (A) both status lights for Scene C and Scene D remains lit. I can continue this with Keypad (B)'s Scene A and B buttons where only one button's status light is lit locally but remotely all four of Keypad (A)'s scene status are lit. The same thing happens to Keypad (B) if I use Keypad (A) locally.
It feels like I'm just missing one step to get the status led for Keypad (A) & (B) to synchronize appropriately, but I cannot find it on the manual or online to finish the project.
Can anybody help?
This is how I set them up:
- Manually Linked Keypad (A) to Fanlinc (A) Scene A to Fan High, Scene B to Fan Med, Scene C to Fan Low, and Scene D to Fan Off.
- Manually Linked Keypad (A) to Fanlinc (B) " " " " " " " " " " " " " " " " " " " " "
- Manually Linked Keypad (B) to Fanlinc (A) " " " " " " " " " " " " " " " " " " " " "
- Manually Linked Keypad (B) to Fanlinc (B) " " " " " " " " " " " " " " " " " " " " "
- Added Radio Button On groups for each of the Scene Buttons on Keypad (A)
- Added Radio Button Off groups for each of the Scene Buttons on Keypad (A)
- Added Radio Button On groups for each of the Scene Buttons on Keypad (B)
- Added Radio Button Off groups for each of the Scene Buttons on Keypad (B)
- Manually Linked each Scene Button on Keypad (A) to Keypad (B)
- Manually Linked each Scene Button on Keypad (B) to Keypad (A)
Good so far, however...
The current issue is that the remote keypad's scenes status do not act as a radio group, only the local scene buttons properly act as a radio group. In otherwords, if I pressed Keypad (B)'s Scene C then Keypad (B)'s Scene D, the local status light will toggle from Scene C to Scene D on Keypad (B) but on Keypad (A) both status lights for Scene C and Scene D remains lit. I can continue this with Keypad (B)'s Scene A and B buttons where only one button's status light is lit locally but remotely all four of Keypad (A)'s scene status are lit. The same thing happens to Keypad (B) if I use Keypad (A) locally.
It feels like I'm just missing one step to get the status led for Keypad (A) & (B) to synchronize appropriately, but I cannot find it on the manual or online to finish the project.
Can anybody help?
Comment