Hi, I'm new here and could really use some help.
I have been trying to get add the KPL to HouseLinc with no success. I have tried "Add INSTEON Device" multiple times, but the KPL is never found (on one attempt I held the KPL's SET button down for two full minutes). There is no INSTEON ID sticker on the front, back or sides of the KPL. There are two other stickers on the front of the KPL: "12073W 1305" and "V3.1 0421". I'm pretty sure the KPL works properly: The buttons control the KPL's connected load and several X10 wall switch modules. Further, I was able to manually change one of the button assignments and successfully did a factory reset.
I thought I might be able to find the ID in the Activity Log, but pressing KPL buttons does not create entries in the Activity window. In fact, there is no Activity whatsoever.
I know full well that the stuff I'm using is old(er), but the budget for this project is really tight and this is what I have:
Questions:
Any assistance with this will be greatly appreciated.
Thanks,
Tenaya
I have been trying to get add the KPL to HouseLinc with no success. I have tried "Add INSTEON Device" multiple times, but the KPL is never found (on one attempt I held the KPL's SET button down for two full minutes). There is no INSTEON ID sticker on the front, back or sides of the KPL. There are two other stickers on the front of the KPL: "12073W 1305" and "V3.1 0421". I'm pretty sure the KPL works properly: The buttons control the KPL's connected load and several X10 wall switch modules. Further, I was able to manually change one of the button assignments and successfully did a factory reset.
I thought I might be able to find the ID in the Activity Log, but pressing KPL buttons does not create entries in the Activity window. In fact, there is no Activity whatsoever.
I know full well that the stuff I'm using is old(er), but the budget for this project is really tight and this is what I have:
- HouseLinc 2.10.25 - Device Definition Version 2.9.87 (recently downloaded/installed)
- PowerLineModem 2413U Revision 2.3 3717 (appears to be properly installed/recognized in HouseLinc)
- KeyPadLinc 12073W 1305 V3.1 0421 with a 30W incandescent light bulb load attached
- Windows 10
Questions:
- I think I'm using "Add INSTEON Device" properly to "find" the KPL, but maybe I'm missing something. Is there some "trick" to it?
- I've read that there is an "Event Viewer" within HouseLinc, but I can find nothing about it the documentation. If what I read about an Event Viewer is actually called the Activity Log, maybe I'm not using it correctly. Does HouseLinc provide some way to "read" INSTEON messages through the PLM from devices that haven't yet been added so I can extract the INSTEON ID?
- Is there some other way I can "discover" the KPL's INSTEON ID so I can enter it manually?
Any assistance with this will be greatly appreciated.
Thanks,
Tenaya
Comment