Hello
Currently have a light fixture controlled with dumb three way switch(s).
( Switch A ) has (2) black wires and (1) red wire. + ground
( Switch B ) has (1) black wire (1) red wire and (1) white wire. + ground
Would like to turn the three way into a two way using one 2477D.
Have REMOVED BOTH SWITCHES and have capped off all of the wires.
With the BREAKER TURNED ON :
( Switch A ) black wire that was connected on the bottom right black screw is HOT.
( Switch A ) red wire that was connected on the top right silver screw is HOT.
( Switch A ) black wire that was connected on the top left silver screw is COLD.
( Switch B ) black wire is HOT
( Switch B ) white wire is HOT
( Switch B ) red wire is HOT
There are two other switches in the gang box which ( Switch A ) is in and there are white wires there as well.
How do I turn this into a TWO WAY SWITCH using the 2477D?
Any assistance is most appreciated.
Currently have a light fixture controlled with dumb three way switch(s).
( Switch A ) has (2) black wires and (1) red wire. + ground
( Switch B ) has (1) black wire (1) red wire and (1) white wire. + ground
Would like to turn the three way into a two way using one 2477D.
Have REMOVED BOTH SWITCHES and have capped off all of the wires.
With the BREAKER TURNED ON :
( Switch A ) black wire that was connected on the bottom right black screw is HOT.
( Switch A ) red wire that was connected on the top right silver screw is HOT.
( Switch A ) black wire that was connected on the top left silver screw is COLD.
( Switch B ) black wire is HOT
( Switch B ) white wire is HOT
( Switch B ) red wire is HOT
There are two other switches in the gang box which ( Switch A ) is in and there are white wires there as well.
How do I turn this into a TWO WAY SWITCH using the 2477D?
Any assistance is most appreciated.
Comment