I have a scene set up with a SwitchLinc Dimmer as the controller and a KeypadLinc Dimmer as the responder and while the scene seems to be working fine (the controller will adjust the responder properly), the opposite isn't true for the status lights on the controller. As an example:
1. Set both to 0%/Off
2. Set the controller (the dimmer) to 100%, the light turns on and the KeypadLinc shows "On"
3. Set the controller to 0%, the light turns off and the KeypadLinc shows "Off"
so everything is working as expected
4. Set the KeypadLinc (the responder) to On/100% and the SwitchLinc Dimmer (the controller) stays at 0% despite the light turning on
5. Manually push the bottom of the rocker on the Dimmer (the controller) and the light turns off as expected - even though the dimmer is showing 0% on the LEDs.
I've looked around for a solution so apologies if there is another post here that provides an explanation, but this one has be stumped. Appreciate any help.
1. Set both to 0%/Off
2. Set the controller (the dimmer) to 100%, the light turns on and the KeypadLinc shows "On"
3. Set the controller to 0%, the light turns off and the KeypadLinc shows "Off"
so everything is working as expected
4. Set the KeypadLinc (the responder) to On/100% and the SwitchLinc Dimmer (the controller) stays at 0% despite the light turning on
5. Manually push the bottom of the rocker on the Dimmer (the controller) and the light turns off as expected - even though the dimmer is showing 0% on the LEDs.
I've looked around for a solution so apologies if there is another post here that provides an explanation, but this one has be stumped. Appreciate any help.
Comment