Announcement

Collapse
No announcement yet.

Garagelinc setup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Garagelinc setup

    I can't seem to get garagelinc to work my plugin module light to be on only when the garage door is open, when the sensors are separated. It seems that I can only make it such my light is on only when the door is closed. What am I missing?

    Sensor Sends
    On when closed
    Off when closed x

    Lamplinc
    Responder x
    Controller
    Both

    #2
    Is it also controlling the garage door with its relay output or are you only using the sensor input to control the LampLinc?
    Was the LampLinc On when you linked them together? Modules can be set to be off when an On command is received.

    Comment


      #3
      Module/lamp was off, door/sensor was closed. Relay off/not using

      Are you saying the state of the module (on or off) matters when linking?
      Last edited by Fizzisist; 08-13-2020, 02:14 PM.

      Comment


        #4
        The manual shows. The Lamplinc should have been On when linked.
        I believe if it is off. You have added it to a scene to be off when the scene is turned on.

        Comment


          #5
          Thanks a bunch - my first device using a sensor. Everything else has been keypads, wired switches and plugins. It never occurred to me the initial state mattered

          Comment


            #6
            Keep us informed if things changed.

            Comment

            Working...
            X