Announcement

Collapse
No announcement yet.

double email and text alerts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    double email and text alerts

    One out of 5 open / close sensors the same one , when triggered will send 2 open or close alerts and emails 15 seconds apart.
    Tried resetting and removing and re installing it but after a short period of time it does it again?

    #2
    1. Go to Email Notifications under your Settings menu option.
    2. In the Add a New Email Recipient section, enter the email you want to receive notifications.
    3. Click Add Recipient. DGCustomerFirst.com
    4. Repeat as needed.

    Comment


      #3
      It seems that you are having trouble with your open/close sensor. One possible reason for this issue is that the sensor is not properly installed or calibrated. You may want to check the installation and calibration of the sensor to ensure that it is working properly. Another possible reason is that there may be interference from other wireless devices in the rooftop snipers area. You may want to try moving the sensor to a different location or changing the channel on your wireless router to see if this resolves the issue.
      Last edited by INSTEON John; 07-04-2023, 01:40 PM. Reason: Erased hidden code linked to a non-relevant web site like spam

      Comment


        #4
        It sounds like the open/close sensor is giving you issues. The sensor may not have been correctly fitted or calibrated, which could be contributing to the problem. If the sensor isn't performing as expected, you might wish to double-check its setup and calibration
        Last edited by INSTEON John; 08-03-2023, 01:13 PM. Reason: Erased hidden code linked to a non-relevant web site like spam

        Comment


          #5
          It appears that you are having problems with the open/close sensor. It's possible that the sensor wasn't calibrated or installed properly, which could be a factor in the issue. Check the sensor's calibration and setup again if it isn't operating as planned.
          Last edited by INSTEON John; 09-23-2023, 01:37 PM. Reason: Erased hidden code linked to a non-relevant web site like spam

          Comment

          Working...
          X