Announcement

Collapse
No announcement yet.

Unlink devices

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Unlink devices

    Sometime ago, I linked my door sensor to my light switch. Opening a door will turn the light switch ON and closing door will turn it off. How do I unlink these two devices?

    #2
    1. press and hold the set button on the door sensor for three seconds and let go.
      1. This puts the device into linking mode.
      2. (the led should be blinking green)
    2. press and hold the set button again on the door sensor for another three seconds and let go.
      1. This moves it from linking to unlinking mode.
      2. (the led should be blinking red now)
    3. go to your light switch and press and hold its set button down for three seconds
      1. depending on the age you may hear a double beep out of the device indicating the link/unlink was successful.
    Now go back to the door sensor and tap the set button as a test to see if the light switch responds. If the switch does not respond then they are unlinked. If the light turns on then something went wrong in one of the above steps.

    Comment


      #3
      Access the settings or account management section of the platform's website or mobile app.
      Last edited by INSTEON John; 07-14-2023, 03:51 PM.

      Comment

      Working...
      X