Turning the load to dim

[50sGuy]

I have a 6 key KPL. Here's what I want to do. When I press key #4, I want the main KPL load to turn on to 40%. (And to turn off when I press #4 again.) Several other actions are already programmed on button #4, and they work just fine.

I know how to toggle the load to 100%, it's the "40%" part that is stumping me. Thanks for your help.

[stusviews]

Adjust the KPL load to 40%. Tap the set button quickly once. The load will blink and the KPL will beep. Turn the load on and off a few times to ensure that it's set to the correct level.

Turn the load on, It should now be at 40%. If so, then hold the desired button (A, B, C, or D) until it starts to blink and the KPL beeps, about 6-10 seconds. Release and hold the On (top) button until the blinking stops. Tap the chosen button a few times. It should turn the load on to 40%.

Adjust the On-level back to 100% (or any other level you want). Tap the set button once quickly. The On/Off button pair will control the load at that level, the programmed button will turn the load on and off at 40%.

[50sGuy]

Thanks. That did the trick.