I have two leak sensors that are in a difficult location for signal. I replaced a traditional wall switch with 5 feet of each sensor with an Insteon dimmer switch. That switch should relay the signal from those devices?
Announcement
Collapse
No announcement yet.
Relaying leak sensor signal
Collapse
X
-
Originally posted by dustintodd View PostI have two leak sensors that are in a difficult location for signal. I replaced a traditional wall switch with 5 feet of each sensor with an Insteon dimmer switch. That switch should relay the signal from those devices?
If you have other dual band switches in your house you can test communication between them by putting the new switch into beacon mode. As long as the other dual band devices are flashing the communication should be good. If you put that new switch into beacon mode and the other dual band devices do not flash you might try installing the switch a little further away.
Plugin modules are really good for this type of issue as they are easier to plug/unplug when trying to find that "sweet" spot.
Comment