(see short video and read below)

With creation of 2 simple 3D printed module (https://www.redpah.com/product/4259) and (https://www.redpah.com/product/4272)

You can put it where you want, you only need a EU SCHUKO socket.
Allows to receive the NOTICES of intrusion ONLY WHEN THE SYSTEM IS ARMED.

The return to the OFF state of MODULE-B can be executed with a simple internal modify (bringing out the 2 contacts of the OFF button) or without modify, with a "Open/Close Sensor"

The special SCHUKO-RELAY item is required for:
- automatic return to the OFF state of the MODULE-B
- SIREN activation

In the SCHUKO-START module you can:
- modify the operating time of SIREN
- connect a device to Auxiliary Contacts (eg. an "Open/Close Sensor" for controlling additional remote items. Eg. sirens, flashing lights or more)

Alarm Unit can be armed/disarmed manually (with remote control or smartphone) or automaticaly (with custom scenes or from particular states of other devices), simply setting the MODULE-A in ON-state (System armed) or OFF-state (System disarmed).

Configuration_A (see video)
- MODULE-B (Insteon EU ON-OFF Module) modified for back to OFF state from 2 external contacts
- SIREN directly connected to OUT connectors of SCHUKO-START module

Configuration_B (see video)
- Insteon Open/Close Sensor linked to MODULE-B in OFF mode
- SIREN directly connected to OUT connectors of SCHUKO-START module

Configuration_C (see video)
- Insteon Open/Close Sensor linked to MODULE-B in OFF mode
- Insteon Open/Close Sensor linked to additional Insteon EU ON-OFF Module in Standard mode
- SIREN connected to one additional Insteon EU ON-OFF Module