Announcement

Collapse
No announcement yet.

Alarm Control Unit with EU On/Off Module and 2 3D printed elements

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Alarm Control Unit with EU On/Off Module and 2 3D printed elements

    (see short video and read below)

    With creation of 2 simple 3D printed module (https://www.redpah.com/product/4259) and (https://www.redpah.com/product/4272)

    You can put it where you want, you only need a EU SCHUKO socket.
    Allows to receive the NOTICES of intrusion ONLY WHEN THE SYSTEM IS ARMED.

    The return to the OFF state of MODULE-B can be executed with a simple internal modify (bringing out the 2 contacts of the OFF button) or without modify, with a "Open/Close Sensor"

    The special SCHUKO-RELAY item is required for:
    - automatic return to the OFF state of the MODULE-B
    - SIREN activation

    In the SCHUKO-START module you can:
    - modify the operating time of SIREN
    - connect a device to Auxiliary Contacts (eg. an "Open/Close Sensor" for controlling additional remote items. Eg. sirens, flashing lights or more)

    Alarm Unit can be armed/disarmed manually (with remote control or smartphone) or automaticaly (with custom scenes or from particular states of other devices), simply setting the MODULE-A in ON-state (System armed) or OFF-state (System disarmed).

    Configuration_A (see video)
    - MODULE-B (Insteon EU ON-OFF Module) modified for back to OFF state from 2 external contacts
    - SIREN directly connected to OUT connectors of SCHUKO-START module

    Configuration_B (see video)
    - Insteon Open/Close Sensor linked to MODULE-B in OFF mode
    - SIREN directly connected to OUT connectors of SCHUKO-START module

    Configuration_C (see video)
    - Insteon Open/Close Sensor linked to MODULE-B in OFF mode
    - Insteon Open/Close Sensor linked to additional Insteon EU ON-OFF Module in Standard mode
    - SIREN connected to one additional Insteon EU ON-OFF Module
Working...
X