I have a micro module installed in my switch and a 2473 wall outlet. I wanted to use it to turn on and off a video game cabinet type slot machine. It took forever to link it. I got it to link and tested with a radio to see if it worked. I plugged in the game and it worked. I then unplugged game to install outlet cover, pushed micro into switch and tested again. No go! It will turn on but not off. I tested with radio and it works fine. Please help!!!
-
-
The game is interfering with the INSTEON signal. Use a FilterLinc to power the game.Message from Forum Admin: stusviews passed away in April 2018. Stu was a huge fan of Insteon and a huge presence on both the Smarthome and Insteon forums, helping thousands of us along the way (he had nearly 20,000 posts to his name). We thank him for his contributions, dedication, and passion for making the Smart Home a reality. He will truly be missed.
Saving energy is not always free. Be a world saver. -
Thanks for the reply. Is there an outlet with a filter built in? I am limited on space behind game to begin with. I have installed so far 4 other micro modules and they are awesome. If need be I can find a new wire with the wire coming from the bottom like an Air conditioner plug.Comment
-
I'm not aware of any outlets with built-in filters. You can plug the FilterLinc into a short extension cord with a right-angle plug. I do exactly that in one location.Message from Forum Admin: stusviews passed away in April 2018. Stu was a huge fan of Insteon and a huge presence on both the Smarthome and Insteon forums, helping thousands of us along the way (he had nearly 20,000 posts to his name). We thank him for his contributions, dedication, and passion for making the Smart Home a reality. He will truly be missed.
Saving energy is not always free. Be a world saver.Comment
-
Awesome. I already ordered one. From what I am reading it will plug into bottom. That will be perfect. This insteon stuff is addictive. I keep thinking of more automation that I "need".
Have a great day.Comment
-
Thank you @stusviews. That worked perfect. Now I am struggling with a 4 scene mini remote. It will not link to supplied with starter kit plug in modules. I tried to link to hub the way someone else mentioned, by adding motion sensor. It works sometime and I finally got a & b to work. I can't get c & d buttons to work. My process was to hit a button then set while hub is locating device. Insteon has to have an easier way. please help I can't wait on hold for an hour. I will post this elsewhere so more folks will see it.Comment
-
See my response to your other post.Message from Forum Admin: stusviews passed away in April 2018. Stu was a huge fan of Insteon and a huge presence on both the Smarthome and Insteon forums, helping thousands of us along the way (he had nearly 20,000 posts to his name). We thank him for his contributions, dedication, and passion for making the Smart Home a reality. He will truly be missed.
Saving energy is not always free. Be a world saver.Comment
Comment